TM 5-3610-257-14
b.
While supporting lens assembly, remove nut and screw securing lens assembly to light box assembly hinge.
c.
Replace lens assembly.
d.
Secure lens assembly to light box assembly hinge with screws and nuts.
CAUTION
Do not use abrasive cleaner which will scratch diffuser surfaces.
e.
Clean inside and outside surfaces of lens assembly diffuser with cheese- cloth moistened with water. Wipe
dry.
f.
Close lens assembly and secure with knobs.
8-16.2. Replace Film Clip.
MOS: 83FJ6, Reproduction Equipment Repairer
TOOLS: Cross Tip Screwdriver
Combination Wrench Set
SUPPLIES: Film Clip
a.
Loosen knobs and carefully swing open lens assembly.
b.
Remove nut and screw securing film clip and remove stiffener and defective film clip.
c.
Position new film clip and secure with stiffener, screw, and nut.
d.
Close lens assembly and secure with knobs.
8-13