TM 5-3610-253-14
ORGANIZATIONAL PREVENTIVE MAINTENANCE CHECKS AND SERVICES - Cont
Table 5-20.
(Number) - Hundreds of Hours
A N - Annually
W - Weekly
B - Before
S
- Semiannually
M - Monthly
D - During
BI - Biennially
Q - Quarterly
A - After
ITEM TO BE INSPECTED
IN-
ITEM
TER-
NO.
PROCEDURE
VAL
PAPER CUTTER - Cont
M
Inspect Main Motor V-Belts - Cont
2
4. Check V-belts' deflection. Deflection
should be 10 mm (5/8 in.). If deflection
differs from specifications, adjust V-belts
by:
Loosen locknuts on underside of motor
a.
adjusting mount.
b. Turn adjusting bolts to the right to tighten
V-belts, or to the left to loosen V-belts.
Be sure to turn both bolts the same amount
each time to maintain pulley alinement.
Tighten locknuts on underside of motor
c.
adjusting mount.
5. Reinstall main motor V-belt cover.
5-393