Insert handle yoke axle through yoke/body holes and secure in place
with split pin.
Attach handle to handle yoke with three bolts and washers.
Attach chain connector to activator arm.
Wipe hydraulic unit and handle components free of oil and dirt.
Fill with hydraulic fluid and bleed air from system.
Replace Ram Seals.
83FJ6, Reproduction Equipment Repairer
Flat Tip Screwdriver
Ball Peen Hammer 4 oz.
2-3/8 in. Wrench
1-3/16 in. Seal Driver
6 mm Hex Head Key Wrench
Snap Ring Pliers
1-1/4 in. Combination Wrench
Hydraulic Fluid (Item 6, Appendix E)
HDO-30 Oil (Item 10, Appendix E)
Cheesecloth (Item 4, Appendix E)
Thread Locking Compound (Item 21, Appendix E)