TM 5-3610-252-14
CAUTION
Use only approved hydraulic fluid.
Motor oil or brake fluid will damage
hydraulic unit.
e.
With lever in up position, pump handle a few times. Air bubbles will
seen in reservoir with slight drop of fluid level.
f. Refill reservoir to within 1/8 in. (3.2 mm) from top.
g.
Place lever to down position, pump handle, and raise forks to maximum be
height.
h. Place lever to up position and lower forks.
i.
Reinstall plug.
j.
Reinstall reservoir cover and secure with two retaining screws.
2-16.2 Replace Reservoir.
MOS: 83FJ6, Reproduction Equipment Repairer
TOOLS :
Flat Tip Screwdriver
SUPPLIES: Hydraulic Fluid (Item 6, Appendix E)
Cheesecloth (Item 4, Appendix E)
a.
Drain hydraulic fluid by removing hydraulic unit (paragraph 2-16.8).
b. Remove two retaining screws holding reservoir cover; remove cover.
2-22